Genuine Capcom Kick Harness for CPS-2 and CPS-3

Genuine NOS (New Old Stock) Capcom Product!

This is the exact kick harness that was provided and shipped with CPS-2 and CPS-3 boards from Capcom.

To be used for connecting B4/B5/B6 buttons (commonly used for light/medium/heavy kick) for P1 and P2 on CPS-2 and CPS-3 games. Can also be used with the Naomi via the Capcom I/O Board and a host of other arcade devices.

Harness features the kick connector on one side, and bare wires on the other side.

To use this on an arcade panel, you will need to crimp connectors to match your buttons. Or you can connect or solder directly to your Supergun, I/O Board, etc.

Alternatively, we can pre-crimp all 8 connectors of this harness using Sanwa supplied .110 Faston AT-110 (2.8mm) connectors and finish them with translucent Shinagawa Shoko OS-110 covers (see second photo for more detail).

NOTE: As standard the CPS-2 kick harness only has two common ground connections. You need to ensure your cabinet has adequate ground wiring for all your buttons, or you can simply manually daisy chain common ground between all of the buttons.

Capcom Part #BGS-006A.
Approximate length of ~1.5 meters.

Genuine Capcom product, imported from and made in Japan.