HAS Power Supply Cover (Meanwell RT Series)

A 3D printed cover for the Mean Well RT series power supplies. It uses a custom PCB with an IEC C5 "cloverleaf" power inlet, a fuse, a switch, and a HAS compatible 6-pin JST-VH connector.

Compatible with RT-65A, RT-85 and RT-125A.

The set includes:
a 3D printed cover printed in black PLA+
a custom PCB with 2 oz copper layers
a 60 cm long HAS compatible 6-pin JST-VH power supply harness (2x16AWG for GND, 2x16AWG for +5V, 1x18AWG for -5V, 1x18AWG for +12V)
3 x fuses, one for each PSU variant (65W, 85W, 125W)
a pair of HEX screws
4 x rubber feet with adhesive
a dust cap

You will need your own IEC C5 cable. It is the same cable that is commonly used with laptop power bricks.

Design and parts by HAS, 3D printed in Australia.

Cover Assembly Instructions HERE

NOTE: Power supply in photos for illustrative purposes only and not included with purchase.